home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HPAVC
/
HPAVC CD-ROM.iso
/
CELLP.ZIP
/
INFA01.TXT
< prev
next >
Wrap
Text File
|
1993-04-16
|
3KB
|
57 lines
INFA 3000
NOTES: This unit has four NAMS
The ESN prefix is 152 decimal, 98 hex. (Walker/Technophone/JRC)
MTC Electronics/Infa: 604-273-6823
PROGRAMING:
1. Turn power on by pressing FCN, 0. Hold 0 for two seconds.
2. Enter FCN, FCN, * 9 7 1 6 2 6 *.
3. Press # to store each data entry.
4. Press Volume up/down to increment entries.
5. To complete programing and exit at any time press FCN, END
(hold for two seconds).
6. Each NAM can only be programed three times, it is believed that
the MIN counter can be reset by entering FCN, FCN, * 6 4 6 2 2 5 7.
If this does not work use an alternate NAM. If more than one NAM
has the same system ID the phone will automatically select the last
NAM with the same SIDH.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 CANNOT BE CHANGED CMT REV NNNN SOFTWARE REVISION
02 1 TO 4 NAM SELECT NAM 1 - 4
03 00000 - 32767 SIDH SYSTEM ID
04 CANNOT BE CHANGED SCM STATION CLASS MARK
05 10 DIGITS MIN MIN (AREA CODE & TEL#)
06 DO NOT CHANGE IDCCA IPCH FOR A SYSTEM
07 DO NOT CHANGE IDCCB IPCH FOR B SYSTEM
08 0333 OR 0334 IPCH INITIAL PAGING CHANNEL
09 2 DIGITS ACCOLC ACCESS OVERLOAD CLASS
10 2 DIGITS GIM GROUP ID (10 IN USA)
11 3 DIGITS LOCK A FULL LOCK CODE
12 3 DIGITS LOCK B PARTIAL LOCK CODE
13 0 OR 1 LC LOCAL USE MARK
14 0 OR 1 EX EXTENDED ADDRESS MARK
15 0 OR 1 PS PREFERRED SYSTEM
16 0 ONLY NSC NON STANDARD CONTROL
17 0 OR 1 EE TRANSMIT DTMF
18 0 OR 1 REP REPERTORY DIALING
19 0 OR 1 HA HORN ALERT
20 0 OR 1 HF HANDS FREE
21 0 OR 1 IRI ROAM INHIBIT
22 0 OR 1 F1 LOCK A ENABLE
23 0 OR 1 F2 LOCK B ENABLE
24 0 OR 1 F3 ENABLE DIAGNOSTICS MODE
(display RSSI & channel #
when FCN 4 is pressed)
25 - 29 0 ONLY F4 - F7 NOT USED